v6 .5
GC

 

Speed Differences Graph

Because in the previous Speed graph, the speeds are shown for all gears per setup in 1 graph, it is hard to compare them. On this page there are 6 graphs, one for each gear in which the speed for 3 setups is shown. So when you load this graph with these same data in all setups, it shows only 1 line like this:

But if there are differences between the setups, they will be shown like this:

In this 'First gear' graph above you can see that Current and Custom setup give nearly the same -but lower- speed results then stock.

If you want to display another RPM range, change the MPRPM in Custom setup and also the Minimum RPM to display in table "Speed in Km/h (Mph) related to Gear and RPM ....". This way you can zoom in on the RPM range you are interested in.  

By hovering the cursor over the intersection of vertical RPM grid lines and the colored speed lines, the corresponding RPM and Speed is shown for that gear.

You can print the graph by hovering over the graph and right click.

When using the Stand Alone version of the Gearing Commander you can save the graphs as PNG, JPG or PDF file the same way.

Next: Shift-Speed Graph

Back to Gearing Commander main page